NETWORK MANAGEMENT 5-37
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
5.6.1.4 Modify Rule
Procedure 5-14
1.
Launch and log in to WebLCT.
2. In the MENU frame on the left, expand Network Management to select IP
Access Control Setting
. The IP Access Control Setting window appears.
3. In the Input Filter List tabbed page, click the Modify Rule tool button on the tool
bar.
Figure 5-57 IP Access Control Setting Window
4. The Input Filter Rule option window appears. Set the filter conditions:
Figure 5-58 Input Filter Rule Option Window
Input Filter List tab
Modify Rule tool button
To Next Page
