NEC iPASOLINK EX Advanced - Update MODEM Parameter Data

CONTROL ITEMS 4-91
iPASOLINK EX Advanced: OPERATION & MAINTENANCE GGS-000548-01E
11. When confirmed, click the Maintenance tool button on the WebLCT tool bar to
exit from the Maintenance Mode.
 When the target object is MC-MV, the Maintenance mode has been already
released. This step ends the procedure.
12. Confirm that the MAINT indicator on the tool bar changes from orange to
white.
This step ends the procedure.
4.9.2.6 Update MODEM Parameter Data
Important:
1. Ensure that the Parameter File to update MODEM that was from NEC has
already been on the site.
2. Check that the prepared Parameter File is for MODEM.
3. To operate the MODEM Parameter download, the system must be set into
the Maintenance mode; Do not cancel the Maintenance mode while the
download process is in progress.
Procedure 4-27
1. Click the Maintenance tool button on the tool bar of the WebLCT to put the
system into the Maintenance Mode. The
MAINT indicator on the tool bar
changes to orange.
2. In the
MENU frame on the left, expand the Equipment Utility to select Update
(Storage -> NE) Utility
.
The
Update (Storage -> NE) Utility window appears.