NEC iPASOLINK EX Advanced - Delete SNMP Community

SECURITY MANAGEMENT 3-21
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
3.4.2 Delete SNMP Community
Procedure 3-4
1. Launch and log in to WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, then
its submenu
Security Management to select Service Status Setting. The
Service Status Setting window appears.
3. Click
Delete SNMP Community tool button on the tool bar.
Figure 3-12 Service Status Setting Window (SNMP Community)
4. The Delete SNMP Community option window appears. Select an SNMP
Community No. from the drop-down list, and click the
OK button.
Figure 3-13 Delete SNMP Communication Option Window
Confirmation
dialog box appears.
Delete SNMP Community button