NEC iPASOLINK EX Advanced - 7 Set MODEM Function

Set MODEM Function 7-1
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
7. Set MODEM Function
Users can configure the port, radio switch, ATPC/MTPC power, etc., for MODEM:

MODEM Port Setting
Specifies the port name of each MODEM.

TX Power Setting
Specifies the threshold of TX power and RX power in MTPC/ATPC configuration.

ALM Mode Setting
Specifies the ATPC power mode and ALM mode for RF communication failure.