NEC iPASOLINK EX Advanced - Service Status Setting

3-12 SECURITY MANAGEMENT
GGS-000547-01E iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING
3.2 Service Status Setting
Service Status Setting displays the status of service and protocol:
Procedure 3-1
1. Launch and log in to WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, and its
submenu
Security Management to select Service Status Setting. The
Service Status Setting window appears:
Figure 3-1 Service Status Setting Window (1/2)