NEC iPASOLINK EX Advanced - Delete SNMP Trap Entry

SECURITY MANAGEMENT 3-27
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
3.5.2 Delete SNMP Trap Entry
Procedure 3-6
1. Launch and log in to WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, then
its submenu
Security Management to select Service Status Setting. The
Service Status Setting window appears.
3. Click
Delete SNMP Trap Entry tool button on the tool bar.
Figure 3-21 Service Status Setting Window (SNMP Trap Entry)
4. The Delete SNMP Trap Entry option window appears. From the drop-down list,
select the No. of SNMP Trap Entry to be removed, and click the
OK button.
Figure 3-22 Delete SNMP Trap Entry Option Window
Delete SNMP Trap Entry