SECURITY MANAGEMENT 3-47
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
3.10 SSHv2
Procedure 3-11
1. Launch and log in to WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, then
its submenu
Security Management to select Service Status Setting. The
Service Status Setting window appears.
3. Scroll down the main window until SSHv2 option appears.
4. Click the
SSHv2 link.
Figure 3-57 Service Status Setting Window (SSHv2, SFTP)
SSHv2/SFTP Setting
option window appears.
To Next Page
