NEC iPASOLINK EX Advanced - Delete NTP Server Address

3-36 SECURITY MANAGEMENT
GGS-000547-01E iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING
3.7.2 Delete NTP Server Address
Procedure 3-9
1. Launch and log in to WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, then
its submenu
Security Management to select Service Status Setting. The
Service Status Setting window appears.
3. Click
Clear NTP Server button on the tool bar.
Figure 3-36 Service Status Setting Window (NTP Server Address)
The Clear NTP Server option window appears.
4. From No. drop-down list, select the number of target NTP Server Address,
and the click the
OK button:
Figure 3-37 NTP Server Address Setting Option Window
Confirmation
dialog box appears.
Clear NTP Server