5-54 NETWORK MANAGEMENT
GGS-000547-01E iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING
5.7.2.2 Modify Static ARP Setting
Procedure 5-21
1.
Launch and log in to WebLCT.
2. In the MENU frame on the left, expand Network Management to select ARP
Setting
. The ARP Setting window appears.
3. In the Static ARP tabbed page, click the IP Address link of target Static ARP.
Figure 5-83 ARP Setting Window
ARP Setting (Modify)
option window appears.
4.
Modify the MAC Address to assign ARP configuration.
To Next Page
