PROVISIONING 6-1
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
6. PROVISIONING
6.1 Overview
The setup procedures provided here are for furthering the system’s fundamental
configuration upon completion of the equipment setup. The setting items are listed as
follows:
Set MODEM Function
Configures the port, radio switch, ATPC/MTPC power, etc., for MODEM.
Set ETH Function
Configures the Ethernet Port, VLAN ETH OAM, RSTP, QOS, Link Loss
Forwarding, etc.
Set Equipment Clock and Synchronization
Sets the internal clock, external clock, and timing source.
Assign Alarm/AIS Settings
Sets the alarm severity and relevant settings of AIS.
Assign PMON/RMON Settings
Sets the threshold of PMON (except Ethernet)/ RMON (Ethernet).
For details, refer to the relevant sections accordingly.
To Next Page
