SECURITY MANAGEMENT 3-33
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
3.7 NTP Server Address
This operation allows a user to register/modify/delete the NTP Server and its
information.
3.7.1 Register/Modify NTP Server Address
Procedure 3-8
1. Launch and log in to WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, then
its submenu
Security Management to select Service Status Setting. The
Service Status Setting window appears.
3. Click the No. of the target NTP Server listed in
NTP Server Address.
Figure 3-32 Service Status Setting Window (NTP Server Address)
The NTP Server Address Setting option window appears.
To Next Page
