NETWORK MANAGEMENT 5-49
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
5.6.2.4 Modify Rule
Procedure 5-18 Forwarding Filter List — Modify Rule
1.
Launch and log in to WebLCT.
2. In the MENU frame on the left, expand Network Management to select IP
Access Control Setting
. The IP Access Control Setting window appears.
3. In the Forwarding Filter List tabbed page, click the Modify Rule tool button on
the tool bar.
Figure 5-74 IP Access Control Setting Window
4. Forwarding Filter Rule option window appears. Modify the filter condition:
Figure 5-75 Forwarding Filter Rule Option Window
Forwarding Filter List tab
Modify Rule tool button
To Next Page
