NEC iPASOLINK EX Advanced - Reset CPU (RF)

CONTROL ITEMS 4-55
iPASOLINK EX Advanced: OPERATION & MAINTENANCE GGS-000548-01E
4.7.2.2 Reset CPU (RF)
Procedure 4-19
1. Click the Maintenance tool button on the tool bar of the WebLCT to put the
system into the Maintenance Mode. The
MAINT indicator on the tool bar
changes to orange.
2. In the
MENU frame on the left, expand the Maintenance Control, then expand
H/W_F/W Reset Control to select F/W Reset Control. The F/W Reset Control
window appears.
3. Click the target
RF link in the Item field.
Figure 4-88 F/W Reset Control Window
4. F/W Reset Control option window appears. Confirm the information then
click the
OK button.
Figure 4-89 F/W Reset Control (RF) Option Window
click