4-54 CONTROL ITEMS
GGS-000548-01E iPASOLINK EX Advanced: Operation & Maintenance
5. Warning dialog box appears. Click the OK button.
Figure 4-85 Warning Box
6. Information dialog box appears. Click the OK button.
Figure 4-86 Information Box
7. When the iPASOLINK EX/A restarts, launch the WebLCT and log in to the
iPASOLINK EX/A again.
8. Verify the information displayed in the
F/W Reset Control window.
Figure 4-87 F/W Reset Control window
9. When confirmed, click the Maintenance tool button on the WebLCT tool bar to
exit from the Maintenance Mode.
10. Confirm that the
MAINT indicator on the tool bar changes from orange to
white.
This step ends the procedure.
To Next Page
