Set ETH Function 8-43
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
8.5.2 FDB Setting (VLAN ID)
8.5.2.1 Service Tab
Procedure 8-11
1. Launch and log in to WebLCT.
2. In the MENU frame on the left, expand Provisioning, then its submenu ETH
Function Setting
to select FDB Setting. The FDB Setting window appears.
3. In the FDB Setting tabbed page, select Service tab, then click on the desired
VLAN ID number to configure.
Figure 8-53 FDB Setting Window — FDB Setting Tab
FDB Setting
option window appears.
To Next Page
