5-32 CORRECTIVE MAINTENANCE
GGS-000548-01E iPASOLINK EX Advanced: OPERATION & MAINTENANCE
Procedure 5-14
1. Check if the Frame ID value specified at local and that specified at the opposing
site are identical.
2. If the specified Frame ID values are the same, replace the equipment.
This step ends the procedure.
Equipment
This condition is not an alarm. The message indicates the PTP Clock of the
equipment.
Equipment
This condition is not an alarm. The message indicates the Clock Priority 1 of
Grandmaster (Top-level Master) to which the target equipment belongs.
Equipment
This condition is not an alarm. The message indicates the Clock Priority 2 of
Grandmaster (Top-level Master) to which the target equipment belongs.
Equipment
This condition is not an alarm. The message indicates the Clock Quality Accuracy of
Grandmaster (Top-level Master) to which the target equipment belongs.
Equipment
This condition is not an alarm. The message indicates the Clock Quality Class of
Grandmaster (Top-level Master) to which the target equipment belongs.
Grandmaster / Clock ID
Grandmaster / Clock Priority 1
Grandmaster / Clock Priority 2
Grandmaster / Clock Quality Accuracy
Grandmaster / Clock Quality Class
To Next Page
