NEC iPASOLINK EX Advanced - Update Configuration Data

CONTROL ITEMS 4-83
iPASOLINK EX Advanced: OPERATION & MAINTENANCE GGS-000548-01E
11. When confirmed, click the Maintenance tool button on the WebLCT tool bar to
exit from the Maintenance Mode.
 When the target object is MC-MV, the Maintenance mode has been already
released. This step ends the procedure.
12. Confirm that the MAINT indicator on the tool bar changes from orange to
white.
This step ends the procedure.
4.9.2.4 Update Configuration Data
 Proceeding through the following terminates the WebLCT and restarts
iPASOLINK EX/A.
NOTES:
1. Do not store the data to be downloaded and the existing Configuration Data
File in the same folder. Keep the data separate so that the data can be
compared.
2. To download the Configuration Data, the system must be set into the
Maintenance mode; Do not cancel the Maintenance mode while the
process is in progress.
Procedure 4-25
1. Click the Maintenance tool button on the tool bar of the WebLCT to put the
system into the Maintenance Mode. The
MAINT indicator on the tool bar
changes to orange.
2. In the
MENU frame on the left, expand the Equipment Utility to select Update
(Storage -> NE) Utility
.
The
Update (Storage -> NE) Utility window appears.