NEC iPASOLINK EX Advanced - Secure Ipasolink EX;A to Antenna Attachment

4-4 MOUNT iPASOLINK EX/A
GGS-000546-01E iPASOLINK EX Advanced:INSTALLATION
4.2.2 Secure iPASOLINK EX/A to Antenna Attachment
1. Using four M6 Screws, secure the iPASOLINK EX/A to the Antenna
Attachment:
NOTE: Tightening torque is 4.0 Nm ±10%
Figure 4-3 Mount iPASOLINK EX/A (example: H Mark is on Top)
This step ends the procedure.
POLE
(
50 ～ 115 mm;  2.0 ～ 4.5 inches)