LICENSE AND USER ACCOUNT 2-37
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
Procedure 2-11 Delete User Group
NOTE: A User Group can be removed only when it has no assigned user account.
1. Launch and log in to
WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, then its
submenu
User Account / Security Setting to select User Group Profile
Configuration
. The User Group Profile Configuration window appears.
3. Click
Delete Group tool button on the tool bar.
Figure 2-45 User Group Profile Configuration Window
4. The Group Setting option window appears. Select a target Group Name to be
removed from the drop-down list, and click the
OK button.
Figure 2-46 Group Setting (Delete) Option Window
To Next Page
