5-22 NETWORK MANAGEMENT
GGS-000547-01E iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING
5. Information dialog box appears. Click the OK button to proceed.
Figure 5-30 Information Dialog Box
6. The Routing Setting window updates the information. Confirm that the newly
added route information is displayed.
Figure 5-31 Routing Setting Window
This step ends the procedure.
Table 5-7 Routing Setting — Routing Protocol Parameters
Parameter Value Description
Routing Protocol Used Enable the use of Routing Protocol.
Nor Used Disables the use of Routing Protocol.
To Next Page
