NETWORK MANAGEMENT 5-65
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
4. Select DHCP Relay from the Server/Relay drop-down list, and specify the
remaining options:
Figure 5-98 DHCP Server/Relay Option Window
5. When completed, click the OK button.
Information dialog box appears.
Table 5-19 DHCP Server/Relay Setting Parameters
Parameter Value Description
Server/Relay Disable Not to use DHCP.
DHCP Server Do not select this choice here.
DHCP Relay Set DHCP Relay.
Bridge No. (IP Address) (available No and
IP addresses)
Registered and available Bridge numbers (IP addresses)
is/are listed to be selected.
DHCP Server Address 192.168.xxx.xxx This option is enabled when the choice is DHCP Relay.
IP Address Range (Start) —— These options are disabled for DHCP Relay setting.
IP Address Range (End) ——
Exception (Start) ——
Exception (End) ——
Security ——
To Next Page
