UNIVERGE SV9100 Issue 1.2
System Hardware Manual 3 - 31
4. Align the upper and lower bracket holes with the heads of
anchor bolts mounted on the wall and slide downward
(refer to Figure 3-40 Install Screws (Option 2)).
5. Connect grounding wire to chassis. Refer to Chapter 4 paragraph 1.3
Installing the 9.5” Chassis on page 3-18 for complete details on
grounding the system.
6. Refer to 2.1 Installation and Safety Precautions on page 4-3 for
installation of blades.
2.2.2.2 Wall Mounting the CHS2UG with the CHS2UG B Small Batt
Box
To install the CHSGW SMALL BATT BOX refer to section 6.3
Installing the CHSGW SMALL BATT BOX on the 9.5” Chassis
on page 3-70
1. Align the bracket halves (refer to Figure 3-37 Wall
Figure 3-40 Install Screws (Option 2)
To Next Page
Loading...
