UNIVERGE SV9100 Issue 1.2
System Hardware Manual 6 - 29
SECTION 11 TELEPHONE ADAPTERS
11.1 Using Adapters
The modular terminals can support the installation of one additional adapter
underneath the terminal. These adapters provide the keyset different
capabilities, depending on the adapter installed.
These optional adapters are not installed on non-modular telephones.
Only the ILPA, ADA and PSA Adapters can be used on the IP phones.
ADA – Conversation Recording
APR – Analog Port Adapter with Ringer
PSA – Keyset/IP Phone Power Failure
When installing or removing the adapter, the keyset should first be unplugged
from the system. External power is not required for the adapter.
Telephones with any adapters installed require an optional wall mount unit
(WM-L) to be wall mounted. The bracket does not accommodate the
adapter(s).
11.2 In-line Power Adapter (ILPA-R)
The In-Line Power Adapter (ILPA-R), which is IEEE 802.3af compliant, detects
power from a PoE-compatible ethernet switch and passes it to the IP terminal.
The ILPA does the negotiation and detection with the switch and then relays
the power to the IP terminal device. This provides an additional way to power
the NEC IP terminals. With this adapter, the IP terminals on the UNIVERGE
SV9100 system can be powered using:
Local power connecting the IP terminal to a local AC wall outlet using the
AC-R Adapter
Figure 6-19 Installing Adapters
To Next Page
Loading...
