Issue 1.2 UNIVERGE SV9100
4 - 96 Installing the SV9100 Blades
6.3 GCD-RGA (Application Gateway)
6.3.1 Description
The GCD-RGA blade is a 4-port switch and router which complies with the
Ethernet specification for 10 Base-T, 100 Base-TX and 1000 Base-TX. This
blade is compatible in LAN applications using 10Mbps, 100Mbps and
1000Mbs. All ports automatically identify and switch 10 Base-T, 100
Base-TX, 1000 Base-TX and Full/Half-Duplex.
Each GCD-RGA blade comes with a built-in router application that provides
the following features:
p VoIP Gateway
p WAN Router:
DHCP
PPPoE
Static IP
p Dynamic DNS
p Virtual Private Network (VPN)
Figure 4-34 GCD-RGA Blade
To Next Page
Loading...
