Issue 1.2 UNIVERGE SV9100
4 - 78 Installing the SV9100 Blades
5.6.4 Connectors
Table 4-42 GCD-PRTA RJ-45 Cable Connector Pin-Outs shows the
pin-outs for the RJ-45 connector. Refer to Figure 4-19 GCD-PRTA
Blade (Front and Side View) on page 4-73 for an illustration showing
the location of the connectors on the PRIU blade.
Note: The order of priority is set up to alarm in the order
LOS>AIS>OOF>RAI.
Table 4-42 GCD-PRTA RJ-45 Cable Connector Pin-Outs
RJ-45 Cable Connector
S-Bus Connection
Pin No. Connection
1RB
2RA
3—
4TB
5TA
6—
7—
8—
RJ-45 Cable Connector – CN2
T-Bus Connection
Pin No. Connection
1RA
2RB
3—
4TA
5TB
6—
7—
8—
Table 4-41 ISDN LED Indications
Alarm Details of the Alarm LED Indication Pattern
To Next Page
Loading...
