UNIVERGE SV9100 Issue 1.2
System Hardware Manual 4 - 79
Table 4-43 GCD-PRTA RJ48C Connector Pin-outs shows the pin-
outs for the 8-pin RJ48C connector for the network and terminal
interfaces.
Table 4-43 GCD-PRTA RJ48C Connector Pin-outs
Network Interface
Pinout for the 8-Pin
RJ48C Connector
Terminal Interface
Pinout for the 8-Pin
RJ48C Connector
Pin
No.
Connection
For connection
to T1 network:
Use AT&T Type
ABAM cable or
equivalent
(individually-
shielded twisted
pair, rated at
100 ohms at 1
MHz).
Pin
No.
Connection
1 RxD (R1) 1 RxD (R)
2 RxD (T1) 2 RxD (T)
4 TxD (R) 4 TxD (R1)
5 TxD (T) 5 TxD (T1)
3, 6 No Connection 3, 6 No Connection
7, 8 No Connection 7, 8 No Connection
To Next Page
Loading...
