NEC Univerge SV9100

System Hardware Manual 6 - 1
Chapter
6
Installing SV9100 Optional Equipment
SECTION 1 GENERAL INFORMATION
This chapter provides information for installing optional equipment, such as
PGD(2)-U10 ADPs, background music, door boxes, DSS consoles, D
term
VSR, external paging as well as other handsets, recording devices and
adapters on the SV9100 digital and IP telephones.
SECTION 2 PGD(2)-U10 ADP
2.1 Using a PGD(2)-U10 ADP
The PGD(2)-U10 ADP provides two circuits which allow connection
to external terminals such as:
 Door Box (eight maximum per system)
 External Speaker (eight maximum with PGD(2)-U10 ADPs [with
amplifier], one on the GCD-CP10 [no amplifier])
 External Music Source (external MOH) (96 maximum per
system)
 External Recording System (96 maximum per system)
 External Ringing
The system allows a maximum of 56 PGD(2)-U10 ADPs to be
installed (48 for ACI ports [external MOH or external recording
system], four for Door Boxes, and four for Paging). The
PGD(2)-U10 ADPs also provides multi-purpose controls. These
control relays can be used for controlling the external amplifier,
external music source and door lock control with the use of a Door
Box. The system allows for up eight general purpose relays with the
PGD(2)-U10 ADPs (four relays on each PGD(2)-U10 ADP).