NEC Univerge SV9100 - Wall Mounting the Base on a Switch Box

UNIVERGE SV9100 Issue 1.2
System Hardware Manual 5 - 73
4.12.1.4 Wall Mounting the Base on a Switch Box
1. Locate the screw holes on the base and hang the
cover over the screws on the switch box as
illustrated in Figure 5-70 Wall Mounting Base on
Switch Box.
2. Hang the Multiline Terminal on the base.
. Because of strength variation in switch boxes, this
method is not recommended.
Figure 5-70 Wall Mounting Base on Switch Box
Figure 5-71 Wall Mounted Multiline Terminal