NEC Univerge SV9100 - GPZ-4 COTE (4 Loop Start Interface Daughter Board); Description

UNIVERGE SV9100 Issue 1.2
System Hardware Manual 4 - 57
5.2 GPZ-4COTE (4 Loop Start Interface Daughter Board)
5.2.1 Description
The GPZ-4COTE blade provides:
 GPZ-4COTE: Four analog loop start trunk circuits
 Four Caller ID Circuits
 Connector for COIU Blade
 Connector for GCD-LTA
Figure 4-15 Installing the GPZ-4COTE Daughter Board