NEC Univerge SV9100 - Battery Safety

UNIVERGE SV9100 Issue 1.2
System Hardware Manual 5 - 129
Handset
Battery Charger
10.2 Battery Safety
q This equipment contains a rechargeable nickel-metal hydride battery.
q Do not short-circuit the battery.
q Do not charge the rechargeable nickel-metal hydride battery used in this
equipment in any charger other than the one designed to charge this battery as
specified in this manual. Using another charger can damage the battery or
cause the battery to explode.
q Use only the appropriate type and size battery pack specified in this manual.
q Do not open or mutilate the battery pack. Released electrolyte is corrosive and
can cause damage to the eyes or skin. It may be toxic if swallowed.
q Exercise care in handling the battery in order not to short the battery with
conducting materials such as rings, bracelets, and buttons. The battery or
conductor can overheat and cause burns.
Power Requirements 10 Vdc from supplied AC adapter
Size 58mm (H) x 215mm (D) x 130mm (W)
Weight 410g
Receive/Transmit Frequency 1880 ~ 1900 MHz
Power Requirements Nickel-Metal Hydride battery pack
Size 163mm (H) x 31mm (D) x 55mm (W)
Weight 150g (Handset = 120g + Battery pack = 30g)
Battery Capacity 910 mAh, 2.4V
Talk Mode 16 hours (typical)
Standby Mode 7 days (typical)
Power Requirements 9V DC from supplied AC adapter
Size 75mm (H) x 100mm (D) x 87mm (W)
To reduce the risk of fire or injury to persons by the battery, read
and follow these instructions.