EasyManua.ls Logo

NEC Univerge SV9100 - Psa-L (Bk) Unit; Psa-L (Wh) Unit

NEC Univerge SV9100
478 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UNIVERGE SV9100 Issue 1.2
System Hardware Manual 6 - 43
11.5 PSA-L (BK) UNIT / PSA-L (WH) UNIT
The PSA-L UNIT (Power Save Adapter), an optional adapter for the ITL/DTL
Terminals, is used with IP telephones to make or receive a call using the
Public Switched Telephone Network (PSTN) when a call cannot be made or
received using the Local Area Network (LAN). When a power failure occurs,
the IP telephone is automatically switched to the PSTN. When power is
restored, the IP telephone restarts and connects to the network unless a
conversation is in progress on PSTN. The PSTN call must be completed by
going on-hook before the connection to the LAN is restored. The unit features:
Survivability in case of power failure or network congestion.
Support on modular terminals (ITL/DTL)
PSTN Type = analog PSTN
Dial method – MF/DF (10pps)
Figure 6-34 PSA-L UNIT
The PSA should not relied upon as the sole means
of providing contact with Emergency services in
the event of a power failure or communication
loss with the main SV9100 system
User System/PSTN
Switch
Volume Control
LED
PSTN

Table of Contents

Other manuals for NEC Univerge SV9100

Related product manuals