UNIVERGE SV9100 Issue 1.2
System Hardware Manual 4 - 27
3.2 GPZ-IPLE (Voice over IP Daughter Board)
3.2.1 Description
The GPZ-IPLE daughter boards are used for converting the RTP
(Real Time Transfer Protocol) packets via the IP network and PCM
highway. The daughter board is installed on the GCD-CP10. The IP
telephones are connected directly to the IP bus. When IP telephones
RJ-45 Cable Connector – J10
(External Source Control)
(No Polarity)
Pin No. Connection
1NC
2NC
3 EXCNT2
4 EXCNT1
5 EXCNT1
6 EXCNT2
7NC
8NC
Figure 4-6 GPZ-IPLE VoIPDB Daughter Board
Table 4-10 GCD-LTA RJ45 Cable Connector Pin-Outs (Continued)
To Next Page
Loading...
