Issue 1.2 UNIVERGE SV9100
6 - 44 Installing SV9100 Optional Equipment
11.5.1 Installing the PSA-L Adapter
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the keyset.
. Only one PSA-L UNIT can be attached to the DTL/ITL multiline
terminal.
3. Lower the tilt leg to the first position (refer to Figure 6-36
Separate Tilt Leg from Leg Support on page 6-45).
Figure 6-35 PSA-L UNIT Connections
Before installing or removing the PSA-L
adapter, remove the line cord, LAN cable, and
then AC adapter from the outlet.
To Next Page
Loading...
