UNIVERGE SV9100 Issue 1.2
System Hardware Manual 5 - 143
3. Place the charging unit on the posts of the wall screws and push down
until it is firmly seated.
4. Plug the AC adapter into a standard 230 Vac wall outlet. Refer to Figure
5-165 Placing the Charging Unit on the Wall.
10.12 Attaching and Removing the Belt Clip
A belt clip can be used to attach the handset to a belt or pocket for convenient
portability.
1. Slide the clip into the tab slots. Press firmly until it snaps into place. The
belt clip fits snugly onto the handset.
Figure 5-165 Placing the Charging Unit on the Wall
Figure 5-166 Attaching the Belt Clip to the Handset
To Next Page
Loading...
