Issue 1.2 UNIVERGE SV9100
4 - 50 Installing the SV9100 Blades
Eight Digital Station ports
Two analog extension ports
Two status LEDs
4.5.2 Installation
Install the GCD-LTA blade into any available universal slot.
When connecting a fax machine or analog
modem, make sure to set Program 15-03-03 to
1 (special terminal) to avoid communication
problems.
The SLIU and SLIDB are categorized as
TNV2. With this designation, off-premise
wiring is not acceptable. Any cabling to the
SLIDB PCB must be within the building – no
outside cabling is permitted.
Branch connection is not acceptable.
CTA adapter fitted to Model C telephone is not
supported on an LTA blade.
To Next Page
Loading...
