NEC Univerge SV9100 - DT Series Optional Terminal Equipment; 8 Lk-L (Bk) Unit;8 Lk-L (Wh) Unit; Installing the 8 LK-L UNIT

Issue 1.2 UNIVERGE SV9100
5 - 76 Installing DT Series Digital and IP Multiline Terminals
5.2 DT Series Optional Terminal Equipment
5.2.1 8LK-L (BK) UNIT/8LK-L (WH) UNIT
Provides eight additional line keys to IDT Series terminals (except
Economy). The unit features:
 Mounts directly to right side of terminal
 Supports Red and Green LED colors
5.2.1.1 Installing the 8LK-L UNIT
1. Remove both plastic panels from the front of the
multiline terminal.
2. Turn multiline terminal upside down.
. Only one 8LK-L UNIT can be attached to the DT Series
multiline terminal.
Figure 5-72 8LK-L UNIT
To prevent possible damage to the 8LK-L
UNIT or the DT Series multiline
terminal during installation or removal,
disconnect the line cord/LAN cable and
the AC/DC adapter from the DT Series
multiline terminal.