NEC Univerge SV9100 - UTR-1-1 USB Handset; Handset Connection; USB Connection

UNIVERGE SV9100 Issue 1.2
System Hardware Manual 5 - 103
6.3 UTR-1-1 USB Handset
The NEC USB telephone can be plugged directly into a PC USB port, enabling
the high quality voice input and output capabilities of a standard desktop
telephone. By connecting it to the USB port of a computer, calls can
immediately be made and received using a SoftPhone without installation of
additional software drivers.
The physical design eliminates stress associated with holding the handset
between the ear and and shoulder. The user immediately hears a dial tone
upon taking the handset off-hook, eliminating the need to click on/off hook
icons in a PC application when making a call.
6.3.1 Handset Connection
Plug the handset cable (RJ-11 connector) into the bottom of the
cradle. Route the handset cable in the handset groove.
6.3.2 USB Connection
Plug a USB cable (type A connector) into the back of the cradle. Plug
the USB cable (type B connector) into the USB port of a PC.
Figure 5-115 Installing the UTR-1-1 USB Handset Cable
Figure 5-116 Installing the UTR-1-1 USB Handset to a PC