NEC Univerge SV9100

Issue 1.2 UNIVERGE SV9100
4 - 48 Installing the SV9100 Blades
4.4.3 Connectors
Table 4-23 GPZ-4LCA/GPZ-8LCE/ RJ-61 Cable Connector Pin-Outs
show the pin-outs for the RJ-61 connector. Refer to Figure 4-12
Installing the GPZ-4LCA Daughter Board on page 4-45 for
illustrations showing the location of the connectors on the SLIDB
blades.
Table 4-23 GPZ-4LCA/GPZ-8LCE/ RJ-61 Cable Connector Pin-Outs
RJ-61 Cable Connector –
48SLIDB – CN2 (ports 9~12)
8SLIDB – CN2 (ports 9~12), CN3 (ports 13~16)
Pin No. Connection
1 T4 (Tip for port 4)
2 T3 (Tip for port 3)
3 T2 (Tip for port 2)
4 R1 (Ring for port 1)
5 T1 (Tip for port 1)
6 R2 (Ring for port 2)
7 R3 (Ring for port 3)
8 R4 (Ring for port 4)