NEC Univerge SV9100 - Pairing a Bluetooth Device and Multiline Terminal (Bluetooth Installed); Accessing the Bluetooth Device Setup Screen; Entering a PIN Code; Pairing

UNIVERGE SV9100 Issue 1.2
System Hardware Manual 5 - 121
8.1.2 Pairing a Bluetooth Device and Multiline Terminal (Bluetooth
Installed)
Access the Bluetooth screen from a multiline terminal menu and
register the Bluetooth headset with the BHA-L UNIT.
8.1.2.1 Accessing the Bluetooth Device Setup Screen
From the multiline terminal, access the setup screen
using one of the following:
 If the BHA-L UNIT is connected to an Aspire X:
Press menu keys > [5. Optional Devices] > [1. Bluetooth].
 If the BHA-L UNIT is connected to a PBX (other than Aspire
X):
Press menu keys > [3. Setup] > [5. Optional Devices] >
[1. Bluetooth].
8.1.2.2 Entering a PIN Code
In pairing a Bluetooth device having a PIN Code other
than 0000, enter a string of four to 16 digits to suit that
device.
8.1.2.3 Pairing
Up to eight Bluetooth devices can be located around the
BHA-L UNIT, select which can be paired with the device
(refer to Figure 5-141 Pairing a Device on page 5-121).
Figure 5-140 Entering a PIN Code
Figure 5-141 Pairing a Device