Issue 1.2 UNIVERGE SV9100
5 - 62 Installing DT Series Digital and IP Multiline Terminals
2. At the Login screen, enter the user name (default = ADMIN)
and password (default = 6633222) and press the OK Soft Key.
3. Press Soft Key 3 for Maintenance Setting.
4. Press Soft Key 4 for Adjust.
5. Press Soft Key 2 for Key Kit Type.
6. Select the type of keypad kit being used by pressing the Up/
Down key.
7. Press Soft Key 4 for Next.
8. Select the type of line key kit being used by pressing the Up/
Down key.
. By default, the correct line key kit for the keypad kit selected above
will be highlighted.
Table 5-14 Keypad Kit Type
Keypad Kit Entry Description
Kit1 Type A – Japan with cursor key
Kit2 Type A – US with cursor key
Kit3 Type B – US with cursor key
Kit4
Kit8 32 Line Key without cursor key
Kit9 Type A – Japan without cursor key
Kit10 Type A – US without cursor key
Kit11 Type B – US without cursor key
Kit12
Table 5-15 Line Key Kit Type
Line Key Kit Entry Description
Kit12 Enhanced 12-Button
Kit24 Enhanced 24-Button
Kit32 Enhanced 32-Button
Kit8 DESI-Less
To Next Page
Loading...
