Issue 1.2 UNIVERGE SV9100
5 - 68 Installing DT Series Digital and IP Multiline Terminals
5-61 Attach Tilt Legs to Multiline Terminal.
3. Push the Tilt Legs upward until they snap into place.
4. Lift both ends of Tilt Legs until they come together (refer to
Figure 5-62 Connecting the Tilt Legs on page 5-68).
5. Snap legs together and adjust to desired height. See Figure
Figure 5-61 Attach Tilt Legs to Multiline Terminal
Figure 5-62 Connecting the Tilt Legs
To Next Page
Loading...
