UNIVERGE SV9100 Issue 1.2
System Hardware Manual 5 - 141
5. Place the base unit on the posts of the wall screws and push down until
it is firmly seated.
6. Plug the other end of the short telephone cord into a telephone wall jack.
7. Plug the AC adapter into a standard 230 Vac wall outlet. Refer to Figure
5-159 Plugging the AC Adapter into the AC Wall Outlet on page 5-139.
. Do not use an outlet controlled by a wall switch.
Figure 5-161 Placing the Telephone Cords Inside the Wall Mount Stand
Figure 5-162 Attaching the Wall Mount Unit to the Wall
To Next Page
Loading...
