NEC Univerge SV9100 - Chapter 5 SV9100 IP K-CCIS; Section 1 System Outline; Section 2 UNIVERGE SV9100 Chassis Programming; Section 3 Programming Example

To Next Page

To Previous Page

UNIVERGE SV9100 Issue 1.2

System Hardware Manual - iii

___________________________________________________________________________________

System Hardware Manual iii

___________________________________________________________________________________

1.1.2.4 Connect the Controlling and Expansion Chassis ...............3-11

1.1.3 Install Grounding on 19” Chassis .............................................3-13

1.1.4 Install Grounding on Multiple 19” Chassis (Optional) ............... 3-14

1.1.5 Install AC Power Cords on 19” Chassis ...................................3-15

1.1.6 Install AC Power Cords on Multiple 19” Chassis (Optional) .....3-16

1.1.7 Install Additional Blades 19” Chassis .......................................3-16

1.1.8 Apply Power to the 19” Chassis ...............................................3-16

1.2 Installing the 9.5” Base (CHS2UG) Chassis .............................. 3-16

1.2.1 Install Grounding on 9.5” Chassis ............................................3-17

1.2.2 Install AC Power Cord 9.5” Gateway or Base Chassis ............ 3-18

1.2.3 Install Additional Blades 9.5” Gateway or Base Chassis ......... 3-18

1.2.4 Apply Power to the 9.5” Gateway or Base Chassis .................3-18

1.3 Installing the 9.5” Chassis ......................................................... 3-18

Section 2 Wall Mounting the Chassis .......................................................3-18

2.1 Wall Mounting the 19” (CHS2UG) Chassis ............................... 3-18

2.1.1 CHS2UG Chassis Wall Mount Installation ...............................3-18

2.2 Wall Mounting the 9.5” Chassis ................................................. 3-25

2.2.1 Option 1 – Wall Mounting the 9.5 inch (CHS2UG) Chassis .....3-25

2.2.2 Wall Mounting the 9.5 inch (CHS2UG) Chassis ......................3-27

2.2.2.1 Wall Mounting the CHS2UG without the CHS2UG B Small Batt

Box 3-29

2.2.2.2 Wall Mounting the CHS2UG with the CHS2UG B Small Batt Box

3-31

Section 3 Floor Mounting the Chassis .....................................................3-36

3.1 Floor Mounting the 19” (CHS2UG) Chassis .............................. 3-36

3.1.1 CHS2UG Chassis Installation ..................................................3-36

3.1.2 Multiple CHS2UG Chassis Installation .....................................3-39

Other manuals for NEC Univerge SV9100