Program 16 to 20
Xen Topaz Programming Manual 137
PROGRAM 20: SYSTEM OPTION SETUP
20-14: C
LASS OF SERVICE OPTIONS FOR DISA/E&M
Input Data (Cont)
Conditions
None
Feature Cross Reference
♦ Class of Service
Telephone Programming Instructions
To enter data for Program 20-14(Class of Service Options for DISA):
1. Enter the programming mode.
2. Enter 20 14
3. Enter the number of the item you want to program.
4. Select the Class of Service number to be programmed by pressing the FLASH or the VOLUME
▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog.
No.
Item Input Data Default
Related
Program
20-14-09
-Not Used-
0 : Off
1 : On
-
20-14-10 Call Forward Setting by Remote Via DISA
0
20-14-11
DISA Trunk Barge-In
This option enables or disables a DISA trunk caller’s
ability to use the Barge In feature.
0
20-14-01 F-Cls1
Del 1digit Dial 0
20-14-xx F-Clsxx
xxxxx
To Next Page
Loading...
