NEC Xen Topaz - Page 192

Program 21 to 25
Xen Topaz Programming Manual 185
PROGRAM 22: INCOMING CALL SETUP
22-11: DID T
RANSLATION NUMBER CONVERSION
Default
Conditions
When 22-11-05 is set to 400 (VRS) then PRG 25-02 must be set.
Feature Cross Reference
♦ Direct Inward Dialling (DID)
Telephone Programming Instructions
To enter data for Program 22-11 (DID Translation Number Conversion):
1. Enter the programming mode.
2. Enter 22 11
3. Enter the number of the item you want to program.
4. Select the Conversion Table number to be programmed by pressing the FLASH or the VOLUME
▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Conversion Table Received Number Target Number
1 00 200
2 01 201
: : :
100 99 299
: : :
2000 No setting No setting
22-11-01 TBL1
Recv No 00
22-11-xx TBLxxxx
xxxxx