Program 26 to 35
Xen Topaz Programming Manual 257
PROGRAM 35: SMDR AND ACCOUNT CODE SETUP
35-02: SMDR O
UTPUT OPTIONS
Description
Use Program 35-02 : SMDR Options to set the SMDR (Station Message Detail Recording) options for the
SMDR port. Refer to the following chart for a description of each option, its range and default setting.
Input Data
IN
SA
SB
SMDR Port Number
1,2
Prog. No. Item Input Data Default
Related
Program
35-02-01
Toll Restricted Call
SMDR can include or exclude calls
blocked by Toll Restriction.
0 : Not Output
1 : Output
1
35-02-02
PBX Calls
When the system is behind a PBX,
SMDR can include all calls or just
calls dialled using the PBX trunk ac-
cess code.
0 : Not Output
1 : Output
1
35-02-03
Trunk Number or Name
Select whether the system should
display the trunk name (0) or the
number (1) on SMDR reports. If this
option is set to “1”, Program 35-
02-14 must be set to “0”
0 : Name
1 : Number
1
35-02-04
Summary (Daily)
Set this option to (1) to have the
SMDR report provide a daily sum-
mary (at midnight every night).
0 : Not Output
1 : Output
1
35-02-05
Summary (Weekly)
Set this option to (1) to have the
SMDR report provide a weekly sum-
mary (every Saturday at midnight).
0 : Not Output
1 : Output
1
35-02-06
Summary (Monthly)
Set this option to (1) to have the
SMDR report provide a monthly sum-
mary (at midnight on the last day of
the month).
0 : Not Output
1 : Output
1
35-02-07
Toll Charge Cost
Set this option to (1) have the SMDR
report include toll charges.
0 : Not Output
1 : Output
1
35-02-08
Incoming Call
Enable this option (1) to have the
SMDR report include incoming calls.
If you disable this option (0), incom-
ing calls will not print.
0 : Not Output
1 : Output
1
35-02-09
Extension Number or Name
Set this option (1) to have the SMDR
report include extension numbers.
Set this option (0) to have the SMDR
report include extension names.
0 : Name
1 : Number
0
To Next Page
Loading...
