NEC Xen Topaz - Page 272

Program 40 to 92
Xen Topaz Programming Manual 265
PROGRAM 40: VOICE MAIL SETUP
40-01: V
OICE MAIL BASIC SETUP
Description
Use Program 40-01 : Voice Mail Basic Setup to define the basic operation of Voice Mail (DSPDB).
Input Data
Conditions
None
Feature Cross Reference
♦ Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-01 (Voice Mail Basic Setup):
1. Enter the programming mode.
2. Enter 40 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item Input Data Default
Related
Program
40-01-01
Exclusive Channel for Voice Mail
Specify the number of channels of
DSPDB which voice mail occupies.
0-8
0
40-01-02 Time Stamp
0 : Disable
1 : Enable
1
40-01-03
Conversation Recording Mode for
After Transfer
Use this program to set up whether
after
Hold Transfer continues recording,
when recording conversation.
0 : Not Continued
1 : Continued
0
40-01-04
Automated Attendant (Voice Mail)
for No Existing Extension
0 : Disable
1 : Enable
0
40-01-05
Erase Message Time
Specify time to Erase Messages for
DSPDB
record media.
0000-2359
(0000 = No setting)
(40-01-06 will not
be followed)
0000
40-01-06
40-01-06
Automatically Erase Message
Erases All messages—New and Old
0-180(day)
0
40-01-05
40-01-01
VM Channel 0
40-01-xx
xxxxx