NEC Xen Topaz - Page 273

Program 40 to 92
Xen Topaz Programming Manual 266
PROGRAM 40: VOICE MAIL SETUP
40-02: M
AIL BOX SETUP
Description
There are a maximum of 300 mailboxes in the DSPDB. Use this program to set the box number and pass-
word linked to the extension number (or pilot number) for each mailbox.
Input Data
Conditions
None
Feature Cross Reference
♦ Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-02 (SMDR Output Options):
1. Enter the programming mode.
2. Enter 40 02
3. Enter the number of the item you want to program.
4. Select the Message Box number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
DSPDB Message Box Number
001-300
Prog. No. Item Input Data Default
Related
Program
40-02-01
Mailbox Number
A mailbox number should use the
same number of an extension.
Up to 4 digits
Mailbox 1 =200
Mailbox 2 = 201
Mailbox 3= 202
Mailbox 4 = 203
Mailbox 5 = 204
Mailbox 6 = 205
Mailbox 7 = 206
Mailbox 8 = 207
40-02-02
Mailbox Password
If not required, leave this option
empty.
Dial 4 digits Fixed
No setting
40-02-01MgBox1
Mail box No.
40-02-xxMgBoxxxx
xxxxx