NEC Xen Topaz - Page 74

Program 12 to 15
Xen Topaz Programming Manual 67
PROGRAM 13: ABBREVIATED DIALLING
13-03: A
BBREVIATED DIALLING GROUP ASSIGNMENT FOR EXTENSIONS
Description
Use Program 13-03 : Abbreviated Dialling Group Assignment for Extensions to assign Abbreviated
Dialling Group for each extension.
Input Data
Default
All Extensions = Group 1
Conditions
None
Feature Cross Reference
Abbreviated Dialling
Telephone Programming Instructions
To enter data for Program 13-03 (Abbreviated Dialling Group Assignment for Extensions):
1. Enter the programming mode.
2. Enter 13 03
3. Enter the number of the item you want to program.
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Extension Number Up to 4 digits
Group Number
1-32
13-03-01 TEL200
Group 1
13-03-xx TELxxxx
xxxxx