NEC Xen Topaz - Page 73

Program 12 to 15
Xen Topaz Programming Manual 66
PROGRAM 13: ABBREVIATED DIALLING
13-02: G
ROUP ABBREVIATED DIALLING BINS
Description
Use Program 13-02 : Group Abbreviated Dialling Bins to define the range of bin numbers to be used by
each Abbreviated Dialling group (refer to Program 13-03).
Input Data
Default
No setting
Conditions
None
Feature Cross Reference
♦ Abbreviated Dialling
Telephone Programming Instructions
To enter data for Program 13-02 (Group Abbreviated Dialling Bins):
1. Enter the programming mode.
2. Enter 13 02
3. Enter the number of the item you want to program.
4. Select the Abbreviated Dialling group number to be programmed by pressing the FLASH or the
VOLUME ▲or VOLUME ▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Abbreviated Dialling Group
Number
Start Address of Abbreviated
Dialling Bin
End Address of Abbreviated
Dialling Bin
1-32 0-1990 0,9-1999
13-02-01ABB Gr1
ABB Start 0
13-02-xxABB Grxx
xxxxx